auto-sync: draw on idle to avoid flicker/tearing
st could easily tear/flicker with animation or other unattended output. This commit eliminates most of the tear/flicker. Before this commit, the display timing had two "modes": - Interactively, st was waiting fixed `1000/xfps` ms after forwarding the kb/mouse event to the application and before drawing. - Unattended, and specifically with animations, the draw frequency was throttled to `actionfps`. Animation at a higher rate would throttle and likely tear, and at lower rates it was tearing big frames (specifically, when one `read` didn't get a full "frame"). The interactive behavior was decent, but it was impossible to get good unattended-draw behavior even with carefully chosen configuration. This commit changes the behavior such that it draws on idle instead of using fixed latency/frequency. This means that it tries to draw only when it's very likely that the application has completed its output (or after some duration without idle), so it mostly succeeds to avoid tear, flicker, and partial drawing. The config values minlatency/maxlatency replace xfps/actionfps and define the range which the algorithm is allowed to wait from the initial draw-trigger until the actual draw. The range enables the flexibility to choose when to draw - when least likely to flicker. It also unifies the interactive and unattended behavior and config values, which makes the code simpler as well - without sacrificing latency during interactive use, because typically interactively idle arrives very quickly, so the wait is typically minlatency. While it only slighly improves interactive behavior, for animations and other unattended-drawing it improves greatly, as it effectively adapts to any [animation] output rate without tearing, throttling, redundant drawing, or unnecessary delays (sounds impossible, but it works).
This commit is contained in:
Avi Halachmi (:avih)
Hiltjo Posthuma
parent
d6ea0a1a61
commit
1d59091065
11
config.def.h
11
config.def.h
|
|
@ -43,9 +43,14 @@ static unsigned int tripleclicktimeout = 600;
|
|||
/* alt screens */
|
||||
int allowaltscreen = 1;
|
||||
|
||||
/* frames per second st should at maximum draw to the screen */
|
||||
static unsigned int xfps = 120;
|
||||
static unsigned int actionfps = 30;
|
||||
/*
|
||||
* draw latency range in ms - from new content/keypress/etc until drawing.
|
||||
* within this range, st draws when content stops arriving (idle). mostly it's
|
||||
* near minlatency, but it waits longer for slow updates to avoid partial draw.
|
||||
* low minlatency will tear/flicker more, as it can "detect" idle too early.
|
||||
*/
|
||||
static double minlatency = 8;
|
||||
static double maxlatency = 33;
|
||||
|
||||
/*
|
||||
* blinking timeout (set to 0 to disable blinking) for the terminal blinking
|
||||
|
|
|
|||
120
x.c
120
x.c
|
|
@ -1867,10 +1867,9 @@ run(void)
|
|||
XEvent ev;
|
||||
int w = win.w, h = win.h;
|
||||
fd_set rfd;
|
||||
int xfd = XConnectionNumber(xw.dpy), xev, blinkset = 0, dodraw = 0;
|
||||
int ttyfd;
|
||||
struct timespec drawtimeout, *tv = NULL, now, last, lastblink;
|
||||
long deltatime;
|
||||
int xfd = XConnectionNumber(xw.dpy), ttyfd, xev, drawing;
|
||||
struct timespec seltv, *tv, now, lastblink, trigger;
|
||||
double timeout;
|
||||
|
||||
/* Waiting for window mapping */
|
||||
do {
|
||||
|
|
@ -1891,82 +1890,77 @@ run(void)
|
|||
ttyfd = ttynew(opt_line, shell, opt_io, opt_cmd);
|
||||
cresize(w, h);
|
||||
|
||||
clock_gettime(CLOCK_MONOTONIC, &last);
|
||||
lastblink = last;
|
||||
|
||||
for (xev = actionfps;;) {
|
||||
for (timeout = -1, drawing = 0, lastblink = (struct timespec){0};;) {
|
||||
FD_ZERO(&rfd);
|
||||
FD_SET(ttyfd, &rfd);
|
||||
FD_SET(xfd, &rfd);
|
||||
|
||||
if (XPending(xw.dpy))
|
||||
timeout = 0; /* existing events might not set xfd */
|
||||
|
||||
seltv.tv_sec = timeout / 1E3;
|
||||
seltv.tv_nsec = 1E6 * (timeout - 1E3 * seltv.tv_sec);
|
||||
tv = timeout >= 0 ? &seltv : NULL;
|
||||
|
||||
if (pselect(MAX(xfd, ttyfd)+1, &rfd, NULL, NULL, tv, NULL) < 0) {
|
||||
if (errno == EINTR)
|
||||
continue;
|
||||
die("select failed: %s\n", strerror(errno));
|
||||
}
|
||||
if (FD_ISSET(ttyfd, &rfd)) {
|
||||
ttyread();
|
||||
if (blinktimeout) {
|
||||
blinkset = tattrset(ATTR_BLINK);
|
||||
if (!blinkset)
|
||||
MODBIT(win.mode, 0, MODE_BLINK);
|
||||
}
|
||||
}
|
||||
|
||||
if (FD_ISSET(xfd, &rfd))
|
||||
xev = actionfps;
|
||||
|
||||
clock_gettime(CLOCK_MONOTONIC, &now);
|
||||
drawtimeout.tv_sec = 0;
|
||||
drawtimeout.tv_nsec = (1000 * 1E6)/ xfps;
|
||||
tv = &drawtimeout;
|
||||
|
||||
dodraw = 0;
|
||||
if (blinktimeout && TIMEDIFF(now, lastblink) > blinktimeout) {
|
||||
tsetdirtattr(ATTR_BLINK);
|
||||
win.mode ^= MODE_BLINK;
|
||||
lastblink = now;
|
||||
dodraw = 1;
|
||||
}
|
||||
deltatime = TIMEDIFF(now, last);
|
||||
if (deltatime > 1000 / (xev ? xfps : actionfps)) {
|
||||
dodraw = 1;
|
||||
last = now;
|
||||
if (FD_ISSET(ttyfd, &rfd))
|
||||
ttyread();
|
||||
|
||||
xev = 0;
|
||||
while (XPending(xw.dpy)) {
|
||||
xev = 1;
|
||||
XNextEvent(xw.dpy, &ev);
|
||||
if (XFilterEvent(&ev, None))
|
||||
continue;
|
||||
if (handler[ev.type])
|
||||
(handler[ev.type])(&ev);
|
||||
}
|
||||
|
||||
if (dodraw) {
|
||||
while (XPending(xw.dpy)) {
|
||||
XNextEvent(xw.dpy, &ev);
|
||||
if (XFilterEvent(&ev, None))
|
||||
continue;
|
||||
if (handler[ev.type])
|
||||
(handler[ev.type])(&ev);
|
||||
/*
|
||||
* To reduce flicker and tearing, when new content or event
|
||||
* triggers drawing, we first wait a bit to ensure we got
|
||||
* everything, and if nothing new arrives - we draw.
|
||||
* We start with trying to wait minlatency ms. If more content
|
||||
* arrives sooner, we retry with shorter and shorter preiods,
|
||||
* and eventually draw even without idle after maxlatency ms.
|
||||
* Typically this results in low latency while interacting,
|
||||
* maximum latency intervals during `cat huge.txt`, and perfect
|
||||
* sync with periodic updates from animations/key-repeats/etc.
|
||||
*/
|
||||
if (FD_ISSET(ttyfd, &rfd) || xev) {
|
||||
if (!drawing) {
|
||||
trigger = now;
|
||||
drawing = 1;
|
||||
}
|
||||
timeout = (maxlatency - TIMEDIFF(now, trigger)) \
|
||||
/ maxlatency * minlatency;
|
||||
if (timeout > 0)
|
||||
continue; /* we have time, try to find idle */
|
||||
}
|
||||
|
||||
draw();
|
||||
XFlush(xw.dpy);
|
||||
|
||||
if (xev && !FD_ISSET(xfd, &rfd))
|
||||
xev--;
|
||||
if (!FD_ISSET(ttyfd, &rfd) && !FD_ISSET(xfd, &rfd)) {
|
||||
if (blinkset) {
|
||||
if (TIMEDIFF(now, lastblink) \
|
||||
> blinktimeout) {
|
||||
drawtimeout.tv_nsec = 1000;
|
||||
} else {
|
||||
drawtimeout.tv_nsec = (1E6 * \
|
||||
(blinktimeout - \
|
||||
TIMEDIFF(now,
|
||||
lastblink)));
|
||||
}
|
||||
drawtimeout.tv_sec = \
|
||||
drawtimeout.tv_nsec / 1E9;
|
||||
drawtimeout.tv_nsec %= (long)1E9;
|
||||
} else {
|
||||
tv = NULL;
|
||||
}
|
||||
/* idle detected or maxlatency exhausted -> draw */
|
||||
timeout = -1;
|
||||
if (blinktimeout && tattrset(ATTR_BLINK)) {
|
||||
timeout = blinktimeout - TIMEDIFF(now, lastblink);
|
||||
if (timeout <= 0) {
|
||||
if (-timeout > blinktimeout) /* start visible */
|
||||
win.mode |= MODE_BLINK;
|
||||
win.mode ^= MODE_BLINK;
|
||||
tsetdirtattr(ATTR_BLINK);
|
||||
lastblink = now;
|
||||
timeout = blinktimeout;
|
||||
}
|
||||
}
|
||||
|
||||
draw();
|
||||
XFlush(xw.dpy);
|
||||
drawing = 0;
|
||||
}
|
||||
}
|
||||
|
||||
|
|
|
|||
Loading…
Reference in a new issue