currently the logic of when to open/close script is scattered around the
entire code-base which is both ugly and error-prone.
this patch centralizes script handling by remembering the relevant
information on each redraw and then comparing it with the previous
information to figure out whether something changed or not.
this also fixes a bug where scripts weren't being called in thumbnail
mode when mouse was used for selecting a different image.
Closes: https://codeberg.org/nsxiv/nsxiv/issues/475
Reviewed-on: https://codeberg.org/nsxiv/nsxiv/pulls/477
Reviewed-by: eylles <eylles@noreply.codeberg.org>
The last time[0] this was discussed, no-one was against it but no-one
was confident in it either and so it was added to nsxiv-extra as a
patch.
But now that enough time has passed, it seems like there's a pretty high
demand for something like this because there's plenty of use-cases that
use nsxiv as a "picker" where it's meant to quickly pick a single file.
And so add this as a convenient default key-bind.
[0]: https://codeberg.org/nsxiv/nsxiv-record/pulls/42
Co-authored-by: eylles <ed.ylles1997@gmail.com>
Co-authored-by: NRK <nrk@disroot.org>
Reviewed-on: https://codeberg.org/nsxiv/nsxiv/pulls/432
Reviewed-by: NRK <nrk@disroot.org>
Co-authored-by: eylles <eylles@noreply.codeberg.org>
Co-committed-by: eylles <eylles@noreply.codeberg.org>
* Imlib2 supports modifying gamma, brightness and contrast directly
while sxiv only supports gamma. Makes sense to extend it to brightness
and contrast as well.
* Since color corrections need to be aware of each other, they have been
refactored into one centralized function.
* This also makes the code more hackable as it makes it easier to add
more color correction functions without them interfering with each
other.
Co-authored-by: 0ion9 <finticemo@gmail.com>
Co-authored-by: NRK <nrk@disroot.org>
Reviewed-on: https://codeberg.org/nsxiv/nsxiv/pulls/396
Reviewed-by: NRK <nrk@disroot.org>
Reviewed-by: TAAPArthur <taaparthur@noreply.codeberg.org>
Co-authored-by: Berke Kocaoğlu <kberke@metu.edu.tr>
Co-committed-by: Berke Kocaoğlu <kberke@metu.edu.tr>
mixing signed and unsigned types in comparison can end up having
unintended results. for example:
if (-1 < 1U)
printf("true\n");
else
printf("false\n");
previously we silenced these warnings, instead just fix them properly
via necessary casting, and in cases where the value cannot be negative
(e.g width/height members) make them unsigned.
Reviewed-on: https://codeberg.org/nsxiv/nsxiv/pulls/336
Reviewed-by: explosion-mental <explosion-mental@noreply.codeberg.org>
* includes are sorted alphabetically
* their grouping and layout is the following:
- nsxiv.h will be the first include
- followed by any internal headers (e.g "commands.h" "config.h")
- followed by system headers (<stdlib.h> etc)
- followed by third party headers (X.h libwebp etc)
* also add `llvm-include-order` check to clang-tidy so that it can catch
unsorted includes during CI.
* rm unused include <sys/types.h>
* move <sys/time.h> to main.c, it's the only file that needs it.
* move TV_* macros to main.c
* let *.c files explicitly include what they need instead of including
them at nsxiv.h
rather than calling the script unconditionally per redraw, we now have
a `title_dirty` flag and keep track of when any of the relavent
information changes.
Co-authored-by: Arthur Williams <taaparthur@gmail.com>
Partially fixes: https://github.com/nsxiv/nsxiv/issues/258
with a couple exceptions as they cause too many -Wshadow warnings.
also moves the `extcmd_t` typedef on top for cosmetic purposes.
also enable `-Wmissing-prototypes` in the ci
this allows for configuring thumbnail mode mouse bindings similar to
image mode bindings.
however we can't put the thumbnails bindings into the existing buttons[]
array due to fallthrough. For example M3 would switch mode and then end
up selecting an image.
which is why thumbnail bindings have been put into it's own array
`buttons_tns[]` and `buttons[]` has been renamed to `buttons_img[]` for
consistency.
Closes: https://github.com/nsxiv/nsxiv/issues/131
fixes all -Wshadow related warnings (on gcc). this would allow us to use
`-Wshadow` in github workflow (https://github.com/nsxiv/nsxiv/pull/195).
i've thought about adding `-Wshadow` to our Makefile as well, but
decided against it to keep the Makefile CFLAGS barebore/minimal.
* specifies the function argument type in commands.h compared to leaving
it unspecified. all the functions in cmd_t must have arg_t as it's
argument.
* changes to commands.h will now trigger a rebuild - this restores old
behavior prior to 12efa0e
* cg_quit now uses it's argument as exit status
* DestroyNotify invokes cg_quit rather than calling exit directly.
* Explicitly pass EXIT_SUCCESS to cgquit in keybinding
Co-authored-by: Berke Kocaoğlu <berke.kocaoglu@metu.edu.tr>
this allows users to configure navigation width from config.h. it also
allows disabling the navigation function entirely by using a 0 width.
one extra functionality this adds is being able to define an absolute
width (in pixels) instead of just percentage via `NAV_IS_REL`.
Co-authored-by: NRK <nrk@disroot.org>
with this change `-0` is turned into a more generic switch which can be
used to send NULL-separated file-list to the key-handler as well.
this also means `-0` no longer implicitly enables `-o`
Closes: https://github.com/nsxiv/nsxiv/issues/140
* tns_clean_cache: remove unused function arg
* remove malloc casting
* improve consistency
use sizeof(T) at the end
* avoid comparing integers of different signedness
* use Window type for embed and parent
* remove unnecessary comparisons
* remove cpp style comments
* improve consistency: remove comma from the end of enumerator list
* Removed useless _IMAGE_CONFIG defines
* consistency: use the same order as snprintf
* Resolve c89 warnings
Co-authored-by: uidops <uidops@protonmail.com>
Co-authored-by: Arthur Williams <taaparthur@gmail.com>
Ctrl-Button1 now has a relative drag using the XC_fleur cursor.
XC_fleur is normally the cursor for "size all" action, which has 4
arrows pointing to 4 directions.
Co-authored-by: NRK <nrk@disroot.org>
Before all the predated commands where kept in an array and their
indexes were used in bindings. This meant that users couldn't add their
own functions from the config file. Now key/mouse bindings have been
changed to to store the function ptr (wrapped in a cmd_t struct to also
store the mode) directly instead.
General cleanup done in this commit:
Defined `MODE_ALL` instead of using magic number.
For example, suppose one had bindings like:
{ 0, XK_q, g_quit, None },
{ ShitMask, XK_q, {quit_err}, None }
{ ControlMask, XK_q, {quit_err, .mode=MODE_IMAGE}, None }
The existing binding `q` has been left unchanged and is defined the same
way. However, the new hypothetical binding `Shift-q` can be used to call
the custom function quit_err in any mode (default). `Ctrl-q` on the
other hand will be called only on image mode.
Closes#50
* remove duplicate comment
* remove empty tabs and blank lines
* move macros and globals ontop
* comment to seprate function implementation
* fix alignment
* switch to *argv[] similar to other suckless code
* kill all empty last lines
* append comment to endif
* reuse existing ARRLEN macro
* comment fall through
* use while (true) everywhere
Co-authored-by: NRK <nrk@disroot.org>
Currently when running the key-handler the statusbar shows a
"Running key-handler..." message, but there's no indication of the prefix key
being pressed.
There's a slight functional benefit of this patch in the sense
that users can visually tell if the key-handler is listening on input or if the
key-handler has been aborted or not.
* add -0 for outputting null-terminated list
this doesn't add much, if any, additional complexity to the codebase and
can be quite handy for scripting purposes.
Closes: https://github.com/nsxiv/nsxiv/issues/67
* Fix typo
Co-authored-by: Berke Kocaoğlu <berke.kocaoglu@metu.edu.tr>
None of the mouse mappings uses a keyboard modifier, making it possible to
access the most basic features by only using the mouse.
Next/previous image with left button depending on cursor position, middle
button for dragging, right button for switching to thumnail mode and wheel for
zooming.
Users can keep the old behaviour by simply not adapting the changes to the
buttons array in config.def.h to their config.h file.
- Functions warn() and die() replaced by GNU-like error(3) function
- Register cleanup() with atexit(3)
- Functions called by cleanup() are marked with CLEANUP and are not allowed to
call exit(3)
