the imlib2 based multi-frame loader has not respected -A setting
since it's introduction in commit 76c2b81b.
also change multi.framedelay to `int` to avoid signedness change
warning.
Reviewed-on: https://codeberg.org/nsxiv/nsxiv/pulls/503
Reviewed-by: eylles <eylles@noreply.codeberg.org>
this makes it so that script outputs are read when the script
actually finishes. one objection to reading on POLLHUP was that
the script might fill up the pipe and get stuck. we already mark
the read-end as non-blocking on our end so might as well make
the write-end non-blocking as well which avoids the script
getting blocked after (and if) it fills up the pipe.
ref: https://codeberg.org/nsxiv/nsxiv/pulls/334
Closes: https://codeberg.org/nsxiv/nsxiv/issues/377
Reviewed-on: https://codeberg.org/nsxiv/nsxiv/pulls/490
Reviewed-by: eylles <eylles@noreply.codeberg.org>
currently the logic of when to open/close script is scattered around the
entire code-base which is both ugly and error-prone.
this patch centralizes script handling by remembering the relevant
information on each redraw and then comparing it with the previous
information to figure out whether something changed or not.
this also fixes a bug where scripts weren't being called in thumbnail
mode when mouse was used for selecting a different image.
Closes: https://codeberg.org/nsxiv/nsxiv/issues/475
Reviewed-on: https://codeberg.org/nsxiv/nsxiv/pulls/477
Reviewed-by: eylles <eylles@noreply.codeberg.org>
currently the autoreload feature of nsxiv is a bit unreliable because we
try to load at the very first event we received. however, the writer
might not be done writing and so we might try to load a truncated image
(and fail).
in the following ascii diagram, function S represents sleep and `+` sign
represents writes by the writer. because we set the sleep (of 10ms) at
the first event, subsequent writes by the writer doesn't influence our
reload logic:
S(10) load()
nsxiv | |
writer + + + + (done)
time(ms): 00 05 10 15
after this patch, (assuming function T (re)sets a timeout), we will keep
(re)setting a timeout on new events giving the writer more time to
finish:
T(10) T(10) T(10) T(10) load()
nsxiv | | | | |
writer + + + + (done)
time(ms): 00 05 10 15 20 25
while this patch makes things significantly more robust, the problem
here is inherently unsolvable since there's no way to tell whether the
writer is done writing or not.
for example, if user does something like `curl 'some.png' > test.png`
then curl might stop for a second or two in the middle of writing due to
internet issues - which will make nsxiv drop the image.
this patch also increases the autoreload delay from 10ms to now 128ms
instead to decrease chances of false failures.
ref: 6ae2df6ed5
partially-fixes: https://codeberg.org/nsxiv/nsxiv/issues/456
commit-message-by: NRK
Reviewed-on: https://codeberg.org/nsxiv/nsxiv/pulls/459
Reviewed-by: eylles <eylles@noreply.codeberg.org>
these document improvements and/or removal of unnecessary code for when
we will require a higher minimum version of Imlib2.
all the comments have been prefixed with "UPGRADE: " for easy grepping.
Reviewed-on: https://codeberg.org/nsxiv/nsxiv/pulls/457
Reviewed-by: explosion-mental <explosion-mental@noreply.codeberg.org>
a lot of application which allow selecting features at build time seem
to output the build config with `--version` or similar (e.g ffmpeg).
aside from giving the user information about the feature set the binary
was compiled with (in case the user didn't compile it themselves, e.g on
a binary distro) it can also (possibly) help when submitting bug
reports.
Reviewed-on: https://codeberg.org/nsxiv/nsxiv/pulls/462
Reviewed-by: explosion-mental <explosion-mental@noreply.codeberg.org>
slight addendum to 657080a7e5
instead of disabling asserts by adding -DNDEBUG to config.mk, this
disables asserts by default in the source code itself. this way, if
someone compiles with `make CFLAGS="-O3 -march=native"` without knowing
about asserts/-DNDEBUG then he won't accidentally get a build with
assertions in it.
this basically makes the assertions opt-in, if someone wants it, he'll
need to *explicitly* set `-DDEBUG` to get it. so that it's not possible
to accidentally end up with assertions enabled.
Reviewed-on: https://codeberg.org/nsxiv/nsxiv/pulls/447
Reviewed-by: TAAPArthur <taaparthur@noreply.codeberg.org>
now that we have long-opts, we don't have to worry about exhausting the
alphabet list for short-opts. so adding a cli flag to set/unset the
checker background makes sense.
ref: https://codeberg.org/nsxiv/nsxiv/issues/404
posix_spawn() is designed especially for this purpose, and thus it's
much more lightweight and efficient than manually fork/dup/exec-ing.
on my system, it improves the performance of spawn() by about 10x. given
that we make frequent calls to potentially multiple scripts, the
increased efficiency will add up overtime.
using posix_spawn() also simplifies the logic quite a bit, despite the
very verbose function names. however it does make cleanup a bit more
complicated.
this patch uses the linux kernel style cleanup strategy [0] (which I'm
personally not a huge fan of, but it fits this situation quite nicely)
with a "stack-like" unwinding via `goto`-s.
additionally simplify the spawn() API by taking in {read,write}fd
pointers and returning the pid instead of using some custom struct.
this coincidently also fixes#299
[0]: https://www.kernel.org/doc/html/v4.10/process/coding-style.html?highlight=goto#centralized-exiting-of-functions
* Imlib2 supports modifying gamma, brightness and contrast directly
while sxiv only supports gamma. Makes sense to extend it to brightness
and contrast as well.
* Since color corrections need to be aware of each other, they have been
refactored into one centralized function.
* This also makes the code more hackable as it makes it easier to add
more color correction functions without them interfering with each
other.
Co-authored-by: 0ion9 <finticemo@gmail.com>
Co-authored-by: NRK <nrk@disroot.org>
Reviewed-on: https://codeberg.org/nsxiv/nsxiv/pulls/396
Reviewed-by: NRK <nrk@disroot.org>
Reviewed-by: TAAPArthur <taaparthur@noreply.codeberg.org>
Co-authored-by: Berke Kocaoğlu <kberke@metu.edu.tr>
Co-committed-by: Berke Kocaoğlu <kberke@metu.edu.tr>
strtol() returns a `long`, but we're storing the result in an `int`
which might end up getting truncated. change `n` to `long` and guard
against >INT_MAX arguments in cases where it matters.
use a float for storing argument of `-S`
change `opt.slideshow` to `unsigned` similar to `img.ss.delay`
Co-authored-by: Berke Kocaoğlu <berke.kocaoglu@metu.edu.tr>
Reviewed-on: https://codeberg.org/nsxiv/nsxiv/pulls/367
Reviewed-by: Berke Kocaoğlu <berke.kocaoglu@metu.edu.tr>
Reviewed-by: explosion-mental <explosion-mental@noreply.codeberg.org>
simply running nsxiv with `--anti-alias` will enable anti-aliasing, and
running it with `--anti-alias=no` will disable it.
the cli flag will overwrite the config.h default.
Closes: https://codeberg.org/nsxiv/nsxiv/issues/349
the current code is quite hacky and complex as it mixes multiple pointers. all
of this complexity is unnecessary. drop it by introducing an explicit scratch
buffer instead of implicitly abusing `arl->filename` as one. this also reduces
some unnecessary allocation overhead.
additionally, the argument to arl_setup must be the result of `realpath(3)` (as
commented in `nsxiv.h`). instead of commenting it, assert it.
and lastly, rename `arl_setup` to `arl_add` since it's not doing any "setup"
but rather *adding* a file to watch.
Reviewed-on: https://codeberg.org/nsxiv/nsxiv/pulls/342
Reviewed-by: explosion-mental <explosion-mental@noreply.codeberg.org>
mixing signed and unsigned types in comparison can end up having
unintended results. for example:
if (-1 < 1U)
printf("true\n");
else
printf("false\n");
previously we silenced these warnings, instead just fix them properly
via necessary casting, and in cases where the value cannot be negative
(e.g width/height members) make them unsigned.
Reviewed-on: https://codeberg.org/nsxiv/nsxiv/pulls/336
Reviewed-by: explosion-mental <explosion-mental@noreply.codeberg.org>
* includes are sorted alphabetically
* their grouping and layout is the following:
- nsxiv.h will be the first include
- followed by any internal headers (e.g "commands.h" "config.h")
- followed by system headers (<stdlib.h> etc)
- followed by third party headers (X.h libwebp etc)
* also add `llvm-include-order` check to clang-tidy so that it can catch
unsorted includes during CI.
* rm unused include <sys/types.h>
* move <sys/time.h> to main.c, it's the only file that needs it.
* move TV_* macros to main.c
* let *.c files explicitly include what they need instead of including
them at nsxiv.h
instead of dancing around with some `init` parameter, directly give
`win_set_title()` what it needs. `get_win_title()` now also does *just*
what the name says.
this simplifies things quite a bit and the functions now do what their
name implies more closely instead of doing some `init` dance internally.
rather than calling the script unconditionally per redraw, we now have
a `title_dirty` flag and keep track of when any of the relavent
information changes.
Co-authored-by: Arthur Williams <taaparthur@gmail.com>
Partially fixes: https://github.com/nsxiv/nsxiv/issues/258
just use a static buffer since the size is constant and doesn't change.
as opposed to using malloc, this also sets the buffer's initial memory
region to 0 by default.
also remove BAR_{L,R}_LEN from nsxiv.h, not needed after commit b4268fbf38
before we were using select, which expected `struct timeval` as
arg. so we needed to do ms -> timeval conversions.
but now since we're using poll, which accepts milisec as arg, there's
no need to do ms -> timeval -> ms. instead have check_timeouts directly
return ms.
with a couple exceptions as they cause too many -Wshadow warnings.
also moves the `extcmd_t` typedef on top for cosmetic purposes.
also enable `-Wmissing-prototypes` in the ci
usage of select (3) in modern programs is typically discouraged.
this simply replaces the select call with poll (3) instead.
and since poll conveniently ignores negative fds, this also reduces
needs for some special casing.
this also handles error if they occur, while old implementation didn't.
other than the error handling, no change in functionality should occur.
not all WMs support `_NET_WM_NAME` and `_NET_WM_ICON_NAME`
this patch sets `WM_NAME` and `WM_ICON_NAME` inside win_set_title()
Closes: https://github.com/nsxiv/nsxiv/issues/233
byteorder_t and size_readable is not used anywhere within the code.
byteorder_t seems to be a remain from some time sxiv handled exif data itself instead of relying on a library, introduced in 691c6d7, and probably became irrelevant when libexif was added as dependency again. And size_readable from some time it displayed the file size in the window title, introduced in bad9a70.
the goal here to mark functions and variables not used outside the
translation unit as static. main reason for this is cleanliness. however
as a side-effect this can help compilers optimize better as it now has
guarantee that a certain function won't be called outside of that
translation unit.
one other side-effect of this is that accessing these vars/function from
config.h is now different.
if one wants to access a static var/func from different translation unit
in config.h, he would have to create a wrapper function under the right
ifdef. for static functions one would also need to forward declare it.
here's a dummy example of accessing the function `run_key_handler` from
config.h under _MAPPINGS_CONFIG
```
static void run_key_handler(const char *, unsigned);
bool send_with_ctrl(arg_t key) {
run_key_handler(XKeysymToString(key), ControlMask);
return false;
}
```
with this change `-0` is turned into a more generic switch which can be
used to send NULL-separated file-list to the key-handler as well.
this also means `-0` no longer implicitly enables `-o`
Closes: https://github.com/nsxiv/nsxiv/issues/140
* tns_clean_cache: remove unused function arg
* remove malloc casting
* improve consistency
use sizeof(T) at the end
* avoid comparing integers of different signedness
* use Window type for embed and parent
* remove unnecessary comparisons
* remove cpp style comments
* improve consistency: remove comma from the end of enumerator list
* Removed useless _IMAGE_CONFIG defines
* consistency: use the same order as snprintf
* Resolve c89 warnings
Co-authored-by: uidops <uidops@protonmail.com>
Co-authored-by: Arthur Williams <taaparthur@gmail.com>
Ctrl-Button1 now has a relative drag using the XC_fleur cursor.
XC_fleur is normally the cursor for "size all" action, which has 4
arrows pointing to 4 directions.
Co-authored-by: NRK <nrk@disroot.org>
Before all the predated commands where kept in an array and their
indexes were used in bindings. This meant that users couldn't add their
own functions from the config file. Now key/mouse bindings have been
changed to to store the function ptr (wrapped in a cmd_t struct to also
store the mode) directly instead.
General cleanup done in this commit:
Defined `MODE_ALL` instead of using magic number.
For example, suppose one had bindings like:
{ 0, XK_q, g_quit, None },
{ ShitMask, XK_q, {quit_err}, None }
{ ControlMask, XK_q, {quit_err, .mode=MODE_IMAGE}, None }
The existing binding `q` has been left unchanged and is defined the same
way. However, the new hypothetical binding `Shift-q` can be used to call
the custom function quit_err in any mode (default). `Ctrl-q` on the
other hand will be called only on image mode.
Closes#50
* Fix regression introduced in c7ca547 which made nsxiv not start in
non-TrueColor X server.
* Introduce a new fix for embedding into tabbed-alpha.
* Fixes a visual glitch from original sxiv when drawing transparent images in 8
bit depth. In 8 bit PseudoColor, `.pixel` is just an index into the 256
defined colors and thus trying to extract rgb bits from it would result in
visual glitch. The values `.color.red` on the other hand and so on are always
integers between 0 and 0xFFFF representing the color as expected.
* Use XColor for win_bg/fg and mrk_fg
Co-authored-by: NRK <nrk@disroot.org>
* remove duplicate comment
* remove empty tabs and blank lines
* move macros and globals ontop
* comment to seprate function implementation
* fix alignment
* switch to *argv[] similar to other suckless code
* kill all empty last lines
* append comment to endif
* reuse existing ARRLEN macro
* comment fall through
* use while (true) everywhere
Co-authored-by: NRK <nrk@disroot.org>
libXft and libfontconfig are now optional dependencies which can be
disabled via `HAVE_LIBFONTS=0`. Disabling them means disabling the
statusbar. This also does not search for freetype2 header if disabled.
Co-authored-by: NRK <nrk@disroot.org>
* add -0 for outputting null-terminated list
this doesn't add much, if any, additional complexity to the codebase and
can be quite handy for scripting purposes.
Closes: https://github.com/nsxiv/nsxiv/issues/67
* Fix typo
Co-authored-by: Berke Kocaoğlu <berke.kocaoglu@metu.edu.tr>
