this happens when the keyhandler is invoked while viewing an animated
image. if {image,thumb}-info scripts exists, everything works as
expected. but if they don't, then update_info will override the
statusbar.
before we were using select, which expected `struct timeval` as
arg. so we needed to do ms -> timeval conversions.
but now since we're using poll, which accepts milisec as arg, there's
no need to do ms -> timeval -> ms. instead have check_timeouts directly
return ms.
with a couple exceptions as they cause too many -Wshadow warnings.
also moves the `extcmd_t` typedef on top for cosmetic purposes.
also enable `-Wmissing-prototypes` in the ci
usage of select (3) in modern programs is typically discouraged.
this simply replaces the select call with poll (3) instead.
and since poll conveniently ignores negative fds, this also reduces
needs for some special casing.
this also handles error if they occur, while old implementation didn't.
other than the error handling, no change in functionality should occur.
this allows for configuring thumbnail mode mouse bindings similar to
image mode bindings.
however we can't put the thumbnails bindings into the existing buttons[]
array due to fallthrough. For example M3 would switch mode and then end
up selecting an image.
which is why thumbnail bindings have been put into it's own array
`buttons_tns[]` and `buttons[]` has been renamed to `buttons_img[]` for
consistency.
Closes: https://github.com/nsxiv/nsxiv/issues/131
fixes all -Wshadow related warnings (on gcc). this would allow us to use
`-Wshadow` in github workflow (https://github.com/nsxiv/nsxiv/pull/195).
i've thought about adding `-Wshadow` to our Makefile as well, but
decided against it to keep the Makefile CFLAGS barebore/minimal.
currently if the keyhandler invocation fails, for example due to it not
being present, the statusbar does not reset and stays on "getting
keyhandler input" message.
now the return value from run_key_handler() is used to determine if the
function was successful or not. and if the function failed, we call
handle_key_handler() with false which resets the statusbar.
we also no longer call redraw() within run_key_handler() and instead assign
it's return value to dirty which does a redraw if true.
rendering is a pretty expensive operation, especially when scaling with
anti-aliasing. by waiting for the image to render before setting
timeout, the actual timeout ends up being (render time + actual delay).
this pretty much fixes the slowdown entirely on all the images i've
tested. it should also improve things noticeably even in cases where
the delay between frames is shorter than how fast we can render.
although on such images, the issue may not be fixed entirely.
Closes: https://github.com/nsxiv/nsxiv/issues/70
* specifies the function argument type in commands.h compared to leaving
it unspecified. all the functions in cmd_t must have arg_t as it's
argument.
* changes to commands.h will now trigger a rebuild - this restores old
behavior prior to 12efa0e
* cg_quit now uses it's argument as exit status
* DestroyNotify invokes cg_quit rather than calling exit directly.
* Explicitly pass EXIT_SUCCESS to cgquit in keybinding
Co-authored-by: Berke Kocaoğlu <berke.kocaoglu@metu.edu.tr>
* fix: send implicit_mod to process_bindings
this solves the edge case where someone might have `ShiftMask + A` in
their keybindings compared to a plain `A`.
Closes: https://github.com/nsxiv/nsxiv/pull/166#issuecomment-978853136
* code-style: smuggle small style fix in
win_draw_bar now mimics autoreload_nop.c functions
with the exception of arrays, all other var names in config.h are in ALL
CAPS. since keyhandler_abort is an unreleased feature, it should be okay
to rename it for consistency.
though.. in the future we should be more careful about naming when
adding new vars to config.h (or the codebase in general.)
the goal here to mark functions and variables not used outside the
translation unit as static. main reason for this is cleanliness. however
as a side-effect this can help compilers optimize better as it now has
guarantee that a certain function won't be called outside of that
translation unit.
one other side-effect of this is that accessing these vars/function from
config.h is now different.
if one wants to access a static var/func from different translation unit
in config.h, he would have to create a wrapper function under the right
ifdef. for static functions one would also need to forward declare it.
here's a dummy example of accessing the function `run_key_handler` from
config.h under _MAPPINGS_CONFIG
```
static void run_key_handler(const char *, unsigned);
bool send_with_ctrl(arg_t key) {
run_key_handler(XKeysymToString(key), ControlMask);
return false;
}
```
while i was initially against this since it can be done via `xargs -0`.
the problem with this approach is that there's a limit to how many args
a command can recieve, leading to problem like this [0] when opening
large (1k~) amount of images.
there's no limit on how big stdin can be, so being able to read a
null-separated list from stdin doesn't have this problem.
[0]: https://github.com/ranger/ranger/pull/2307#issuecomment-818683515
this allows users to configure navigation width from config.h. it also
allows disabling the navigation function entirely by using a 0 width.
one extra functionality this adds is being able to define an absolute
width (in pixels) instead of just percentage via `NAV_IS_REL`.
Co-authored-by: NRK <nrk@disroot.org>
with this change `-0` is turned into a more generic switch which can be
used to send NULL-separated file-list to the key-handler as well.
this also means `-0` no longer implicitly enables `-o`
Closes: https://github.com/nsxiv/nsxiv/issues/140
* tns_clean_cache: remove unused function arg
* remove malloc casting
* improve consistency
use sizeof(T) at the end
* avoid comparing integers of different signedness
* use Window type for embed and parent
* remove unnecessary comparisons
* remove cpp style comments
* improve consistency: remove comma from the end of enumerator list
* Removed useless _IMAGE_CONFIG defines
* consistency: use the same order as snprintf
* Resolve c89 warnings
Co-authored-by: uidops <uidops@protonmail.com>
Co-authored-by: Arthur Williams <taaparthur@gmail.com>
Before all the predated commands where kept in an array and their
indexes were used in bindings. This meant that users couldn't add their
own functions from the config file. Now key/mouse bindings have been
changed to to store the function ptr (wrapped in a cmd_t struct to also
store the mode) directly instead.
General cleanup done in this commit:
Defined `MODE_ALL` instead of using magic number.
For example, suppose one had bindings like:
{ 0, XK_q, g_quit, None },
{ ShitMask, XK_q, {quit_err}, None }
{ ControlMask, XK_q, {quit_err, .mode=MODE_IMAGE}, None }
The existing binding `q` has been left unchanged and is defined the same
way. However, the new hypothetical binding `Shift-q` can be used to call
the custom function quit_err in any mode (default). `Ctrl-q` on the
other hand will be called only on image mode.
Closes#50
Previously, the value of imgcursor was determined by where a pointer
binding was set to a ci_cursor_navigate. If it was then the pointer
would change to left/right arrows depending on the position relative to
the window. Now the user has full control of over it which also allows
them to preserve the behavior in case they wrap the function.
* remove duplicate comment
* remove empty tabs and blank lines
* move macros and globals ontop
* comment to seprate function implementation
* fix alignment
* switch to *argv[] similar to other suckless code
* kill all empty last lines
* append comment to endif
* reuse existing ARRLEN macro
* comment fall through
* use while (true) everywhere
Co-authored-by: NRK <nrk@disroot.org>
Currently when running the key-handler the statusbar shows a
"Running key-handler..." message, but there's no indication of the prefix key
being pressed.
There's a slight functional benefit of this patch in the sense
that users can visually tell if the key-handler is listening on input or if the
key-handler has been aborted or not.
ten_ms needed to be a global but after the following commit
3724d3fc17 this no longer holds true.
it can simply be local to run, as it's not used anywhere else.
Previous the code only allowed ShiftMask,ControlMask or Mod1Mask to be
used in keybindings and the presence of any others modifiers would be
ignored. Most problems generally allow certain modifiers to be be
ignored but not most and certainly don't allow Super-A to be treated
like A.
Now users can use any modifiers they want in keybindings and can also
ignore any modifiers they want. By default only ModMask2 (commonly
numlock is ignored)
Co-authored-by: N-R-K <79544946+N-R-K@users.noreply.github.com>
If the user closed our window, the program won't automatically be die.
It may look dead as there would be no graphical indication that it was
running, but it still would be using/wasting the same resources.
Now the program will abruptly exit when its window is killed.
